Hydrants | Benito

View 1 2 3

Fire Protection and Systems

Dry Riser Hydrants

These hydrants are used in areas prone to frost and where there is a risk that a vehicle impact could break the column, causing uncontrolled water flow and potentially damaging pumping stations. Part of this type of hydrant is above ground, while the rest is buried underground.

Dry barrel hydrant DN100
HIDCSF

Hydrants Below Ground Level

They are completely buried, and are used in areas where there is no space available to install them on the surface due to road traffic and where there is also a risk of frost.

Underground Hydrant SIMPLE DN100
HIDN100

Hidrante bajo nivel tierra DOBLE DN100-70-70
HIDN1002X70

Irrigation Mouth

BR40R H40

H-40 irrigation outlet for water supply in irrigation networks and water supply systems. Designed for safe and efficient installation, with robust construction and top access via a manhole cover. TECHNICAL SPECIFICATIONS DN-40 connection Dimensions (W × D × H) 305 × 305 × 270.5 mm Base diameter Ø 210 mm Top diameter Ø 274 mm Connection height 149 mm Connection diameter Ø 90 mm Other diameters Ø 45 / Ø 110 mm Materials: Steel and rubber components High resistance MANEUVER Component ↓

Irrigation Mouth

BR40N BR40R -73523-COPIA

H-40 irrigation outlet for water supply in irrigation networks and water supply systems. Designed for safe and efficient installation, with robust construction and top access via an access cover.

Protective lantern

HDICFANAL HIDRANTE DE COIUMNA

Pole Hydrants Protection Lantern, consisting of a lower cast iron cup and two upper polyester caps, with a screw-lock system. Designed to protect the Hydrant connections from external agents and facilitate access to the outlet nozzles, allowing for quick connection of hoses and fire extinguishing equipment. Parts breakdown : 1- Right lid - Polyester 2-Left tabs - Polyester 3-Lower cup - Ductile iron 4- Locking screw - Stainless steel